Description
Yoke Grade 8 Bolt-on Lifting Point 8-H08
BS EN 1677-1+2
These Yoke Bolt on type lifting points can be bolted to any steelwork and be used as a lifting attachment point following a suitable proof test
They can also be used as Lashing Points
USES
- Designed to be semi-permanent lashing or lifting point
- Suitable for attachment to lifting beams and spreader beams
- Designed with spring, stop at any angle supplied without bolt
- Pivots 180° and allows side load lifting.
- Manufactured from forged alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN1677-1.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts are traceable to Test Certification.
- Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended.
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- Design Factor 5 : 1
- All YOKE lifting points meet or exceed all the requirements of ASME B30.26.
DATA SHEET LINK BELOW
YOKE BOLT ON LIFTING POINT SPECIFICATION
METRIC SPECIFICATIONS
| Part Code |
WLL tonnes |
A mm |
B mm |
D mm |
F mm |
H mm |
K mm |
L mm |
N mm |
R mm |
Mass Kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-058-1T | 1.0 | 50 | 72 | 14 | 27 | 55 | 98 | 139 | 14 | 24 | 0.7 |
| 8-058-3T | 3.0 | 58 | 84 | 17 | 33 | 50 | 114 | 144 | 18 | 29 | 1.1 |
| 8-058-5T | 5.0 | 64 | 116 | 22 | 43 | 74 | 160 | 203 | 23 | 33 | 2.5 |
IMPERIAL SPECIFICATIONS
| Part Code |
WLL lbs. |
A inch |
B inch |
D inch |
F inch |
H inch |
K inch |
L inch |
N inch |
R inch |
Mass lbs. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-058-1T | 2200 | 1.97 | 2.83 | 0.55 | 1.06 | 2.17 | 3.86 | 5.47 | 0.55 | 0.94 | 1.5 |
| 8-058-3T | 6600 | 2.28 | 3.31 | 0.67 | 1.30 | 1.97 | 4.49 | 5.67 | 0.71 | 1.14 | 2.4 |
| 8-058-5T | 11000 | 2.52 | 4.57 | 0.87 | 1.69 | 2.91 | 6.30 | 7.99 | 0.91 | 1.30 | 5.5 |
