Sumner 2000 Series Material Lift – 2010, 2015, 2020 & 2025 Models

£2,400.00£4,075.00

Features:

  • Lifts up to 1,000 lb (455 kg)
  • 10, 15, 20 and 25 foot heights (3.5, 4.9, 6.3 and 7.7 m)
  • Galvanised
  • No tools required
  • No loose hardware
  • Mast hold-down secures mast for safe transport
Clear
SKU: Series 2000 Categories: , ,

Description

Sumner Lifting continues its tradition of quality and value with its line of Material Lifts. Built and designed for the job site, these Sumner products help move heavy loads safely and easily.

Sumner 2000 Series Material Lift

This compact lift offers stronger mast design and a superior cabling system.

The shorter mast sections allow the 2000 to travel through doorways without tipping and to fit nicely into vehicles with small storage space.

  • 10′, 15′, 20′ & 25′ heights (3.5 m, 4.9 m, 6.3 m & 7.7 m)
  • 650 – 1,000 lb maximum load capacity (300 – 455 kg)
  • Fits through standard doorways & tail gates
  • Loading Bar – great for overhead cranes
  • Pulley Guards prevent cable from coming off
  • Reversible forks
  • Plunger pins for quick readjustment and compact storage
  • No tools needed – no loose parts
  • Variety of attachments
  • Large 7/32″ (5.5mm) load cable
  • Load cable feeds inside mast (no more exposed cable just inches away from operator’s face

CLICK BELOW FOR DATA SHEET

SUMNER 2000 SERIES DATA SHEET

Standard Features on 2000 & 2100 Lifts

s2000_f_winch.jpg Sumner-built Winch
Highly reliable, single-speed winch uses idler roller to feed four rollers to feed cable evenly on the drum to avoid cable flats
2100rforks_med_1.jpg Reversible Forks
By pulling plunger pins, forks can be repositioned for added height or just to get flush with the ceiling.
s2000_f_lockw.jpg Lockable 5″ Casters
Hard tread urethane wheels with Delrin® bearings.
s2000_f_legs.jpg Fast Action Stabilizer Legs
Mounted on base top, stabilizer legs fold down with ease and lock in place. The 2118 and 2124 models come with stabilizer legs ( optional on models 2010, 2015, and 2112).
s2000_f_rollerw.jpg Roller Wheels
Helps to roll into trucks or vans
s2000_f_compact.jpg Ideal for compact storage
No tools or loose hardware to worry about. Leg lock mechanism releases with the push of a button and locks in the stored position. Leg rollers allow lift to be wheeled around. Forks remove by pulling plunger pins.
s2000_f_10wheels.jpg 10″ Rough Terrain Wheels
Makes loading a truck or van hassle free ( optional on Series 2000 Lifts).

Series 2000 Material Lifts

Part No. Description Max Height Lifting Capacity Lift Weight Shipping Weight
Feet Meter Lb. Kg. Lb. Kg. Lb. Kg.
786700 2010 Material Lift 11′ 7-1/8″ 3.5 1,000 455.0 188 85.5 223 104.4
786701 2015 Material Lift 16′ 2-1/2″ 4.9 800 360.0 280 127.3 315 143.2
786702 2020 Material Lift 20′ 9-3/4″ 6.3 800 360.0 355 161.4 390 177.3
786703 2025 Material Lift 25′ 5-1/8″ 7.7 650 300.0 430 195.5 465 211.4
Series 2000 Material Lift Dimensions 2010 2015 2020 2025
Inches Meters Inches Meters Inches Meters Inches Meters
Height – stowed 76.0 1.93 76.0 1.93 76.0 1.93 76.0 1.93
Length – stowed 34.0 0.86 34.0 0.86 34.0 0.86 34.0 0.86
Height – operating 76.0 1.93 76.0 1.93 76.0 1.93 76.0 1.93
Length – operating 62.0 1.57 62.0 1.57 73.0 1.84 73.0 1.84
Base width 31.25 0.80 31.25 0.80 31.25 0.80 31.25 0.80
Width with stabilizer legs 74.0 1.88 74.0 1.88 74.0 1.88 74.0 1.88
Ground clearance 2.5 6.4 cm 2.5 6.4 cm 2.5 6.4 cm 2.5 6.4 cm
Load height (minimum) 6.0 15.2 cm 6.0 15.2 cm 6.0 15.2 cm 6.0 15.2 cm
Maximum height (forks down) 9′ 7-1/2″ 2.9 14′ 2-3/4″ 4.3 18′ 10″ 5.7 23′ 5-3/8″ 7.1
Maximum height (forks reversed) 11′ 7-1/8″ 3.5 16′ 2-1/2″ 4.9 20′ 9-3/4″ 6.3 25′ 5-1/8″ 7.7

Options

Cable Stay Brake (#783881)

Each mast and carriage can have a factory installed, gravity actuated safety brake which holds loads in place in the event the cable should go slack.

Pipe Cradle (#783705)

Great for duct pipe or other HVAC applications. Slides over standard forks. Packaged in sets of two.

p_cradle_1_med_1.jpg

Boom Carriage (#783642)

Ideal for installing pipe or lifting “from the top” applications. Uses four attaching plunger pins and has a 40″ (100 cm) reach. Hook has five locations with load capacities of 650 lbs (300 kg), 525 lbs (240 kg), 425 lbs (195 kg), 300 lbs (135 kg) and 200 lbs (90 kg).

Fork Extensions (#783691)

With the push of a button, forks may be extended from 28″ to 42″ (71–106 cm). With longer forks, the weight capacity decreases to 200 lb (90 kg) and is clearly shown on the forks when extended. A second button returns the extension for convenient storage inside the forks.

Foot Jack (#784070)

Optional Foot Jack allows user to easily fold the legs of the lift up or down without laying the lift on it’s back.

Tray (#786320)

Great for HVAC applications and positioning transformers and junction boxes.
Steel tray slides onto forks.

Galvanized Finish (#776270)

Now available in optional galvanized finish!

Boom Assembly Carriage Sumner 2000 / 2100 783642

Sumner Contractor Material Lift – 2112, 2118 & 2124 Models

You may also like…