The William Hackett CP-C4 corrosion protected chain hoist meets and exceeds the requirements of the following international standards:
British Standard BS EN13157:2004 + AI:2009
American Standard ASME B30.16-2012
Australian Standard AS1418.2-1997
South African Standard SANS 1594:2007
NORSOK R-002: 2017.
The William Hackett CP-C4 chain hoist is manufactured in accordance with EN13157 which requires that it can be used within an operating temperature range of -40C to +55C.
William Hackett has taken its extensive knowledge of corrosion protection acquired in the supply of specialist topside and subsea hoisting range to the offshore sector and translated this technology to a second generation range of William Hackett CP-C4 anti corrosion chain hoists.
These hoists can be supplied in the following configurations;
Single hook suspension unit
Low headroom combined chain hoist and push travel trolley
Low headroom combined chain hoist and geared travel trolley
All the above hoist configurations can also be supplied with the following options:
Calibrated Grade T (8) load chain to BS EN818-7 zinc plated with zinc plated hand chain
Calibrated Grade T (8) load chain to BS EN818-7 DT9 corrosion coated and hand chain Dacromet corrosion coated.
Calibrated Grade S (6) 316L stainless steel load chain, hand chain and bottom hook (stainless steel bottom hooks are only available for 500kg and 1 tonne units)
Overload protection option available.
500hrs + Protection against salt spray tests according to ASTM B117
Twin pawls as standard
Heavy duty forged safety catches
Stainless steel fixings used throughout the hoist
Hook housing is bolt connected using cap head screws and nyloc nuts
All hoist components are corrosion protected
Load chain meets the requirements of European standards: EN818-7
Compact and robust design for easy handling
Performance and Testing
The William Hackett CP-C4 chain hoist has been fully tried and tested to include:
Minimum Breaking Load – a minimum of 4 x the WLL
The load chain anchor / end stop tested to at least 2.5 x the WLL with no restriction of either the brake or gears
All Hoists are 100% proof tested at 1.5 x the Working Load Limit
Light load of 2% of Working Load Limit